Step and Repeat Banner Printing in San Fernando, CA
Step and repeat banners in San Fernando, CA from Imagination Works Graphics And Printing can brand your event photo wall with true dye-sublimated, glare-free fabric or 13 oz. vinyl, in sizes from 5ft x 8ft to 20ft x 8ft. Our San Fernando shop prints in-house, backed by more than 20 years of large-format experience.
Why Order Your Step and Repeat From Imagination Works
20+ years of large-format printing, produced in-house in San Fernando, CA.
True dye-sublimated polyester graphics that reduce glare under flash and event lighting.
Five stock sizes, from 5ft x 8ft to 20ft x 8ft, plus custom dimensions for tight or wide venues.
Vinyl in 13 oz. scrim and 18 oz. blockout, or dye-sublimated polyester fabric, matched to the venue.
Printed at 2045 Glenoaks Blvd., San Fernando, CA 91340 on professional large-format equipment, with local pickup Monday to Friday.
Artwork accepted in JPG, HEIC, PNG, PDF, PSD, and AI up to 10 MB, with in-house design support.
What's Included in a Step and Repeat Banner
| Backdrop Type | Material | What’s Included | Best For |
| Dye-Sublimated Fabric Step & Repeat | Dye-sublimated polyester | Matte, low-glare graphic, foldable | Red carpets, press lines, indoor media |
| Tension Fabric Backdrop Display | Dye-sublimated fabric on portable frame | Fabric graphic plus aluminum tension frame, optional double-sided configuration | Trade show booths, conferences |
| Vinyl Step & Repeat Banner | 13 oz. scrim vinyl, 18 oz. blockout available | Printed vinyl banner, pole pockets or grommets | Outdoor activations, high-traffic reuse |
| Telescopic Banner Stand | Aluminum telescopic frame | Adjustable frame with carry case | Freestanding, portable backdrops |
The dye-sublimated fabric step and repeat transfers dye into the polyester fibers, producing a matte graphic with a low-glare surface suitable for photography. The vinyl step and repeat prints on 13 oz. scrim vinyl, with 18 oz. blockout available for heavier-duty, high-traffic backdrops. Both formats support repeated logo placement across the backdrop width, with single-sided printing standard and double-sided printing available for compatible tension fabric configurations.
Our large-format workflow prints fabric by dye sublimation and vinyl by eco-solvent, and recommends 150 DPI or higher source files for clean output at display size. RIP software and precise layout control help maintain consistent logo placement and color reproduction across every repeat. Vector PDF and AI files scale without loss, while raster files need high resolution before enlargement.
Mounting hardware matches the material and the venue. Vinyl banners hang from pole pockets or grommets, while fabric graphics mount to compatible aluminum tension or telescopic frames. The frame packs into a carry case for transport between photo zones.
How We Produce Your Step and Repeat Banner
.1
Consultation and Material Match
..2
Design and Artwork Prep
...3
In-House Production
....4
Pickup, Delivery, or Installation
Related Services
LET'S CREATE SOMETHING EXTRAORDINARY TOGETHER.
SCHEDULE YOUR APPOINTMENT TODAY!
Areas We Serve
| Area | Drive Time to Shop |
| San Fernando, CA | On-site (0 min) |
| Sylmar | ~7 min |
| Pacoima | ~8 min |
| Arleta | ~10 min |
| Mission Hills | ~10 min |
| Lake View Terrace | ~10 min |
| Granada Hills | ~12 min |
| North Hills | ~15 min |
| Greater Los Angeles | Varies |
Times are approximate driving estimates from the shop and vary with Los Angeles traffic. Planning an event outside these areas? Call to confirm coverage across the San Fernando Valley and Greater Los Angeles.
Order a Step and Repeat Banner in San Fernando
Planning an event in San Fernando or the San Fernando Valley? Call Imagination Works Graphics And Printing at (818) 362-2876 to confirm your step and repeat size, material, and artwork before production. Every backdrop is printed in-house at 2045 Glenoaks Blvd., San Fernando, CA 91340 and is ready for local pickup Monday to Friday.
Reviews From Our Customers
Step and Repeat Banner FAQs
What is a step and repeat banner?
A step and repeat banner is a branded event backdrop printed with a repeating logo pattern, so sponsor logos stay visible in photos taken from any angle. The format prints on dye-sublimated polyester fabric or 13 oz. and 18 oz. vinyl for red carpets, press walls, trade shows, and product launches. Clean logo spacing keeps the branding readable in every shot.
What sizes do step and repeat banners come in?
Step and repeat banners come in five stock sizes: 5ft x 8ft, 8ft x 8ft, 10ft x 8ft, 12ft x 8ft, and 20ft x 8ft, plus custom dimensions. The 8ft and 10ft widths suit compact photo areas, while the 12ft and 20ft widths hold group photos and wider sponsor patterns. Logo repeats scale with the backdrop width.
Is fabric or vinyl better for a step and repeat backdrop?
Dye-sublimated polyester fabric is well suited for photography because its matte surface reduces glare under flash and event lighting. Vinyl in 13 oz. or 18 oz. blockout is more durable and better suited to outdoor activations and repeated handling. Fabric folds flat for transport, while vinyl rolls between events.
What file formats does Imagination Works accept?
Imagination Works Graphics And Printing accepts JPG, HEIC, PNG, PDF, PSD, and AI files up to 10 MB for step and repeat artwork. Vector files such as PDF and AI are preferred because they scale to backdrop size without quality loss. Our team confirms resolution, bleed, and color mode per project so logos stay sharp at full display size.
Does Imagination Works help with the design?
Imagination Works Graphics And Printing provides in-house design support for step and repeat layouts and also accepts customer-supplied artwork. Our design team spaces the repeating logo pattern, keeps a minimum logo size of 8 to 10 inches for readability, and reviews the layout with you before production. Neutral or solid backgrounds are recommended to preserve logo contrast in photos.
Can a step and repeat banner be used outdoors?
Step and repeat banners work indoors and outdoors when the material and hardware match the venue. Vinyl handles outdoor activations and high-traffic setups, while dye-sublimated fabric suits glare-free indoor media walls. Telescopic aluminum stands and banner stands adapt to different photo zones and venue layouts.
About Imagination Works Graphics And Printing
Imagination Works Graphics And Printing is a San Fernando team with 20+ years of large-format and commercial printing expertise. The shop produces banners, signs, vehicle graphics, business collateral, stickers, and apparel in-house, serving schools, businesses, and event organizers across Los Angeles, the San Fernando Valley, and Southern California.