Foam board printing in San Fernando, CA provides lightweight, rigid displays for presentations, retail signage, events, directional signs, and other indoor visual communications. iWorks Printing provides custom foam board printing with design support backed by 20+ years of printing and graphics experience.
20+ Years Of Experience
iWorks Printing brings more than two decades of experience in printing and graphics production.
iWorks Printing handles foam board projects from its shop at 2045 Glenoaks Blvd., San Fernando, CA 91340.
iWorks Printing keeps foam board projects connected to its in-house printing capabilities from approved artwork through production.
iWorks Printing works with existing artwork or helps create a custom layout when design support is needed.
iWorks Printing can coordinate foam board signs with Banner Printing, Banner Stands, Posters, Step & Repeat, and other display graphics for the same project.
Foam board printing supports compact presentation graphics, larger event displays, retail promotions, and other temporary indoor signage.
| Option | Typical Display | Common Sizes (*) |
| Presentation Boards | Tabletop or easel displays | 18″ x 24″, 24″ x 36″ |
| Event Signs | Freestanding or mounted displays | 18″ x 24″, 24″ x 36″ |
| Retail Display Boards | Countertop and in-store displays | 11″ x 14″, 18″ x 24″, 24″ x 36″ |
| Photo & Graphic Boards | Mounted visual displays | 18″ x 24″, 24″ x 36″, custom sizes |
(*) Sizes shown are common foam board formats and may vary by project and provider.
Need a specific size or custom configuration? Contact iWorks Printing at (818) 362-2876 to confirm the options available for your project.
Common foam board configurations vary by thickness, finish, and display method:
Thickness
Common foam core thicknesses include 3/16 inch and 1/2 inch. Thinner boards suit lightweight, temporary displays, while thicker boards provide additional rigidity for larger graphics.
Finishes
Common options include matte, gloss, and lamination, depending on the desired appearance and surface protection.
Display Options
Easel backs, grommets, and other mounting methods may be available depending on the project and display setup.
Specialty Options
Dry-erase surfaces and removable mounting systems are also available in the broader foam board display market.
Available materials, finishes, mounting methods, and specialty options can vary by project. Contact iWorks Printing to confirm the appropriate configuration before production.
.1
..2
...3
....4
Foam board combines a lightweight foam core with a rigid surface, making it practical for temporary indoor graphics that need more structure than a paper poster.
Portable Display Material
Lightweight construction makes foam board practical for graphics that need to move between presentations, booths, classrooms, or event spaces.
Clean Viewing Surface
The rigid face keeps text, photography, logos, and other graphics flat for close-range viewing.
Suitable For Temporary Signage
Foam board works well for short-term displays that do not require a permanent rigid sign installation.
Versatile Graphic Surface
Foam board can support photography, promotional messaging, informational graphics, branding, and other full-color artwork.
Foam board printing works across business, school, retail, event, and promotional environments where lightweight rigid signage is appropriate.
Business Presentations
Foam board can support proposals, charts, product information, photography, and branded visual materials for meetings or conferences.
Retail Promotions
Foam board can support temporary campaigns, point-of-purchase messaging, product information, and seasonal graphics.
Event Communication
Foam board can display schedules, sponsor information, registration details, welcome messaging, and directional content.
Visual Exhibits
Foam board can support photography, collages, informational graphics, and branded displays for schools, organizations, and exhibits.
iWorks Printing is located at 2045 Glenoaks Blvd., San Fernando, CA 91340. The times below are approximate driving estimates from the shop and can vary with Los Angeles traffic.
| Area / Community | Estimated Drive Time From Our Shop |
| Sylmar | Approximately 5–10 minutes |
| Pacoima | Approximately 10 minutes |
| Mission Hills | Approximately 10 minutes |
| Lake View Terrace | Approximately 10–15 minutes |
| Granada Hills | Approximately 15 minutes |
| Arleta | Approximately 15 minutes |
| North Hills | Approximately 15–20 minutes |
Outside these communities? Call (818) 362-2876 to discuss your foam board printing project and available fulfillment options.
Planning foam board printing in San Fernando, CA for a presentation, event, retail display, or promotion? Send iWorks Printing the size, quantity, artwork, intended use, and deadline so the team can review the project, recommend an appropriate configuration, and confirm available specifications and production timing.
Foam board printing creates lightweight, rigid graphics for temporary indoor display applications. Its foam core provides more structure than a loose paper poster while remaining practical for presentations, promotional graphics, informational signs, and other displays that may need to be positioned or moved between locations.
Common foam board sizes include 11″ x 14″, 18″ x 24″, 24″ x 36″, and 36″ x 48″, while custom dimensions may also be used for specific projects. Available dimensions depend on production requirements. Contact iWorks Printing with the intended size, quantity, artwork, and display use to confirm the available options.
Common foam board thicknesses include 3/16 inch and 1/2 inch, with the appropriate thickness depending on the size and display setup. Thinner foam core is commonly considered where lightweight handling is important, while thicker boards provide additional rigidity. Contact iWorks Printing to confirm the thickness options available for your project.
Yes. iWorks Printing provides in-house design support for foam board and other printing projects. The team can prepare existing artwork for production or develop a custom layout when design assistance is needed. Providing the intended dimensions, message, logo or images, and display context helps iWorks Printing plan the artwork around the project.
Foam board is generally better suited to indoor and temporary display applications than prolonged outdoor exposure. Outdoor signage may require a different rigid material based on weather, mounting, and installation conditions. iWorks Printing can review the intended location and discuss whether foam board or another signage option is more appropriate.
Foam board printing turnaround varies by size, quantity, artwork readiness, finishing, and project requirements. iWorks Printing confirms production timing after reviewing the project details. For an event or fixed deadline, contact the San Fernando shop at (818) 362-2876 to confirm the available production schedule before placing the order.
Imagination Works Graphics And Printing, also known as iWorks Printing, is a San Fernando print and graphics company with 20+ years of experience. From its shop at 2045 Glenoaks Blvd., San Fernando, CA 91340, iWorks Printing provides in-house printing, custom design support, signage, large-format graphics, and event printing for businesses, schools, organizations, and other local customers. iWorks Printing connects design and production through one local provider, supporting projects from artwork preparation through in-house production.
