Mesh banners in San Fernando, CA, from Imagination Works Graphics And Printing are printed on 8 oz to 10 oz airflow-perforated mesh for chain-link fences, stadium rails, and scaffolding. Each banner is printed and finished in-house, then picked up, shipped, or installed after a site survey.
20+ years of experience
Mesh banner, fence wrap, and scaffolding wrap projects come from a team with more than two decades in printing and graphics.
In-house production
Artwork review, printing, and finishing all happen at the 2045 Glenoaks Blvd. shop in San Fernando.
Wide range of mounting surfaces
Installers mount mesh on chain-link fences, scaffolding, stadium rails, masonry, stucco, wood, metal, and light poles.
Site survey before every install
Technicians check substrate, mounting height, hardware, and wind exposure before installation day.
Trusted by local customers
The San Fernando shop holds a 4.9-star average across 89 Google reviews.
| Variant | Material | Weight | Best for | Indoor/Outdoor |
| Chain-Link Fence Wrap | Perforated mesh vinyl | 8 oz to 10 oz | Long perimeter runs tied off with zip ties or bungee cords | Outdoor |
| Stadium Rail and Outfield Fence Banner | Perforated mesh vinyl | 8 oz to 10 oz | Athletic fields with open wind exposure | Outdoor |
| Scaffolding Mesh Wrap | Perforated mesh vinyl | 8 oz to 10 oz | Scaffold frames at height with high wind load | Outdoor |
Chain-link fence wraps cover long perimeter runs while the perforations vent wind through the printed face. Zip ties pass through grommets into the chain-link weave, and bungee cords add flex on temporary fence displays. Imagination Works Graphics And Printing matches grommet spacing to final dimensions so tension spreads evenly across the span.
Stadium rail and outfield fence banners carry team names, sponsor logos, and spirit graphics across open athletic fields. Grommets spaced to the final dimensions fasten the mesh to rails and posts, and reinforced hems spread tension along the edge.
Scaffolding mesh wraps turn scaffold frames into branded surfaces without the sail effect of solid vinyl. Imagination Works Graphics And Printing technicians assess mounting height, access, and wind exposure before installation day, then select anchors for the frame. Heat-welded edges and reinforced hems hold the grommet line under constant tension.
Fence banners turn chain-link perimeters into readable signage for job sites, renovations, events, and athletic fields. Construction fence wraps run the length of temporary chain-link fencing around a building project, carrying contractor branding, safety messaging, reopening dates, or phone numbers for street traffic. Each wrap is sized to the measured span and fence height, commonly 4 ft, 6 ft, or 8 ft, and the perforated mesh vents wind to lower the load on grommets and fence posts. Zip ties lock permanent runs through the grommets, while bungee cords flex on temporary fencing.
| Attribute | Value |
| Substrate | 8 oz to 10 oz airflow-perforated mesh vinyl |
| Production | Full-color, in-house at 2045 Glenoaks Blvd. |
| Color handling | Resolution, bleed, and CMYK color review |
| Edge finishing | Reinforced hems, heat-welded edges |
| Mounting points | Grommets spaced to final dimensions, pole pockets |
| Hardware | Zip ties, bungee cords, site-specific anchors |
| Sizing | Custom, cut to the measured fence span or scaffold run |
| Fulfillment | Pickup, shipping, or professional installation |
Perforated mesh vinyl is a banner substrate punched with open holes that pass air through the printed face, lowering wind load on grommets and fence posts. A 13 oz scrim vinyl banner blocks airflow across its full surface and behaves like a sail, so solid banners on exposed fences often need half-moon wind slits. Imagination Works Graphics And Printing prints 8 oz to 10 oz mesh for scaffolding, chain-link fencing, and exposed outdoor installations.
Reinforced hems and heat-welded edges distribute tension along the grommet line, where wind-loaded banners tear first. Pole pockets sleeve over crossbars on rail displays, while zip ties lock permanent chain-link runs and bungee cords flex on temporary fencing.
Perforations cut the printable surface, so small type and photographic detail read softer on mesh than on smooth indoor vinyl. Vector logos, large type, and high-contrast CMYK color hold at viewing distance, and the open weave makes mesh single-sided, unlike 18 oz blockout vinyl.
| Format | Construction | Wind behavior | Best for |
| Mesh banner | 8 oz to 10 oz airflow-perforated mesh | Vents wind through perforations | Scaffolding, chain-link fencing, exposed sites |
| 13 oz vinyl banner | 13 oz scrim vinyl | Blocks airflow like a sail | Storefronts, fence lines, event backdrops |
| 18 oz blockout banner | Opaque blockout vinyl | Blocks airflow | Double-sided banners, leasing signs |
Mesh banners fit open, wind-exposed sites where the display must stay flat and attached. Standard 13 oz vinyl fits sheltered locations viewed up close, and 18 oz blockout fits displays read from both sides.
Mesh banners suit any exposed outdoor installation where a solid 13 oz vinyl banner would catch wind. Common applications include:
For installed projects, the site survey reviews substrate, mounting height, and wind exposure before production, so each banner matches its location.
Imagination Works Graphics And Printing confirms artwork requirements for each project before production. Files print best on perforated mesh when they follow these guidelines:
Imagination Works Graphics And Printing also provides design support for projects that need a custom banner layout.
.1
..2
...3
....4
| Area | Drive time (approx.) | Service |
| San Fernando | Under 5 min | Print, pickup, install |
| Sylmar | ~10 min | Print, install |
| Pacoima | ~10 min | Print, install |
| Granada Hills | ~12 min | Print, install |
| Van Nuys | ~18 min | Print, install |
| Burbank | ~20 min | Print, install |
Call (818) 362-2876 to order mesh banners for a fence line, stadium rail, or scaffold run. Share the fence span, site address, and mounting surface, and the team confirms hardware, access, and a site-survey date. Local pickup is available at 2045 Glenoaks Blvd., San Fernando, CA 91340.
Mesh banner timing depends on banner size, quantity, finishing, and installation scheduling, so Imagination Works Graphics And Printing reviews the deadline during the initial consultation. That consultation covers the product, dimensions, quantity, deadline, intended use, and available artwork before production begins. Installed projects also need a site-survey date, which the team confirms along with hardware and access.
Mesh banners and fence wraps are sized to the measured fence span or scaffold run rather than a fixed menu. Fence wraps typically match fence height, and chain-link fences commonly stand 4 ft, 6 ft, or 8 ft tall. Technicians measure the span during the site survey on installed projects, then match grommet spacing to the final dimensions.
Vector PDF and AI files print sharpest on perforated mesh because logos and type scale to banner size without softening. The quote form also accepts JPG, HEIC, PNG, and PSD files up to 10 MB. Raster files belong at final print size in CMYK color mode, since perforations already reduce fine detail.
Mesh banners vent wind through their perforations, so they generally do not need the half-moon wind slits often cut into solid vinyl. Solid 13 oz vinyl blocks airflow across its full surface and catches wind on exposed fences. Imagination Works Graphics And Printing reviews wind exposure, mounting height, and load-bearing anchor points during installation planning.
Imagination Works Graphics And Printing provides design support for custom mesh banner and fence wrap layouts. The team accepts customer-supplied artwork or works on a custom layout when one is needed, then reviews the files before production. Design, printing, and mounting stay coordinated through one local team at 2045 Glenoaks Blvd. in San Fernando.
Mesh banners can return for recurring campaigns through seasonal takedown, storage, and rehang from Imagination Works Graphics And Printing. Reinforced hems and heat-welded edges distribute tension along the grommet line at every install. Storing a cleaned, fully dry banner rolled rather than folded keeps creases out of the printed face between seasons.
Imagination Works Graphics And Printing is a San Fernando team with 20+ years of large-format and commercial printing expertise. Alongside signs, vehicle graphics, stickers, and apparel, the team prints mesh banners and fence wraps in-house and installs them across the San Fernando Valley, Los Angeles, and Southern California.